- 26 -
5.2 Operation
Before the first use
•
Before use clean the device according to instructions in section 6 “Cleaning”.
•
Prepare appropriate cups. Cups must be
clean and dry before putting in the device.
•
Place prepared cups one in another in the
compartments.
•
Compartments are designed for 8 cups each
of maximum diameter of 90 mm.
NOTE!
We recommend putting cups in the
compartments upside down.
Heating of cups
•
Connect the device to the single grounded socket.
•
Turn the device on with use of ON/OFF switch
(put it in position “I”). That switch is located on
the right side of device base (right figure).
•
Cup warmer is heated automatically, temperature range is from 47 to 52°C.
Cups are kept warm as long as the device is turned on.
NOTE!
Optimum heating is obtained when the cup compartments are completely
filled and cups are placed one on another, upside down.
•
Remove cups as required, holding them by ear.
HOT SURFACE!
Cup compartments are hot during operation. Maintain
caution while touching those surfaces to avoid burns.
Hold the cups by ears while removing them from the device.
