- 24 -
Tips for use
•
Energy usage and damage to the device are greatest when there are larger
numbers of full bottles in the device, or when the doors are held open for longer
periods of time.
•
To reduce loss of cold, keep the doors open for the shortest time possible. Do
not open the doors more often than is necessary.
•
In the event of a power outage, do not open the doors unless necessary to
avoid loss of cold.
•
Never allow the device to go longer than 10 minutes without power.
•
Following a power outage or disconnection of the drinks freezer
from its power
source, do not connect the device to a power source for at least 5 minutes.
6. Cleaning and maintenance
6.1 Safety advice
o
Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o
Clean the device regularly.
o
Wash the device's interior and exterior with warm water, a moist cloth and delicate
cleaning agent.
o
Wipe the device with clean water.
o
Clean the door seals regularly. To do so, use a soft cloth and delicate cleaning agent,
then scrup the seal with a soft cloth.
CAUTION!
Never use hot water to clean the device!
