Technical Data
109901
13 / 30
EN
Control Function
Control Valve
Before starting, set the current time and water hardness in degrees.
The valve is set by default to regenerate at 2:00 AM at 20 German degrees.
Salt Replenishment Reminder
The system automatically detects the salt level in the brine tank each time after
regeneration. If the salt level is below normal, the low salt sensor will relay this to
the intelligent control system, and a "SALT" alarm will be displayed in the screen.
The buzzer will sound daily from 7:30 PM to 10:30 PM to remind the user to
replenish the salt.
Salt should be replenished on time to avoid using unsoftened water. When the
display shows the "SALT" alarm, the salt in the brine tank can be used for 2 or 3
more regenerations.
Bypass
The bypass connection allows for convenient installation and maintenance. There
are three different types of states when the bypass handle is rotated.
Service position
Bypass position
Shut-off position
Inlet
Discharge
Inlet Discharge
Inlet Discharge
Fig. 2
DRY Brine Tank
The system fills the brine tank each time just a few hours before regeneration to
keep the brine tank largely dry, preventing salt from accumulating above the tank or
leaking out.
INTELLIGENT Control
• The water softening system is equipped with the latest intelligent control valve,
described below.
Summary of Contents for WEH1500
Page 1: ...WEH1500 109901...
