Installation and operation
109901
15 / 30
EN
5
Installation and operation
CAUTION!
Incorrect installation, positioning, operation, maintenance or misuse of
the appliance may lead to personal injury or property damage.
Positioning and installation, as well as repairs may be performed by
authorised technical service only and in compliance with the applicable
national law.
NOTE!
The manufacturer disclaims all liability and provides no warranty for
damages, which may be attributed to non-observance of regulations or
incorrect installation.
5.1
Installation
Information for Installer
• All installation and maintenance work on the water softening system must be
performed only by trained and authorized specialized personnel.
• Unpack the appliance and discard the entire packing material. Never remove the
rating plate or any warning signs from the appliance.
• Before installing the water softening system, the appliance working with it
(dishwasher) must be free of lime and gypsum deposits.
• Do not install the appliance in the vicinity of heat sources and open flames.
Protect the appliance from sunlight.
• Protect the appliance from mechanical damage.
• If the water pressure in the water supply line exceeds 6 bar, it is necessary to
install a pressure reducer to the appliance.
• Accessories for the water softening system in contact with water must be made
of material suitable for this purpose.
• All parts must be installed in accordance with the country's guidelines for the
installation of drinking water systems.
• The ambient temperature at the installation site must be at least 10°C.
• Protect the appliance from frost.
Summary of Contents for WEH1500
Page 1: ...WEH1500 109901...
