Assembly Instructions
Flexi-News™ cross category
1.
2.
3.
4.
First, take base (
A
) and ensure brakes are
applied to the two castors that have them.
Braked castors are at opposite corners of
base.
With the base locked in place, drop the RH
panel (
C
) into the base (
A
) as shown above.
Next secure the RH panel (
C
) in place with
x4 thumb screws (
L
). Repeat steps 2 and
3 for the LH panel (
B
). Both LH and RH
panels should now be in place as in
Fig. i
5.
6.
Install the remaining confectionery shelves
(
F
) to create a 3 tier module on the left
hand side.
Next place the LH insert panel (
E
) onto the
base as shown.
Take the first confectionery shelf 1 (
F
) and locate
the slots on the sides onto the lowest set of metal
studs on the left hand panel of the existing display
and the LH insert panel (
D
).
Tel: 0113 244 5524 Fax: 0113 244 6664 email: sales@bartuf.com web: www.bartuf.com
All dimensions are approximate and may be subject to change.
All drawings and designs are protected by design right and copyright©
Patents GB 2293538B.GB 2317328 US 6,112,912
x1
x1
x4
x1
x1
x3/5
x3
F
D
Flexi News™
tall triple
B001730
Flexi News™
triple
B001727
F
F
PUSH
DOWN
C
L
Fig. i
x1
x1
x1
x1/2
x8
A
