Assembly Instructions
Flexi-News™ cross category
1.
2.
3.
4.
First, take base (
A
) and ensure brakes are
applied to the two castors that have them.
Braked castors are at opposite corners of
base.
With the base locked in place, drop the body
panel (
B
) into the base (
A
) as shown above.
Next secure the body panel (
B
) in place
with x4 thumb screws (
F
). Screw the fixings
through holes in side of base and through
body panel.
5.
6.
Repeat steps 4 and 5 for the second
confectionery shelf (
C
). Next install the
100mm shelf (
D
) above the two
confectionery shelves (
C
) as shown.
Next take the first of the confectionery shelves (
C
).
Locate the slots on the sides of the shelf with the
studs on the body panel (
B
).
Guide the slots on the sides of the shelf onto the
metal studs on the body (
B
). Push down until the
shelf ‘snaps’ into place.
Tel: 0113 244 5524 Fax: 0113 244 6664 email: sales@bartuf.com web: www.bartuf.com
All dimensions are approximate and may be subject to change.
All drawings and designs are protected by design right and copyright©
Patents GB 2293538B.GB 2317328 US 6,112,912
x1
x1
x1
x1
x2
D
C
A
B
F
x4
C
C
PUSH
DOWN
Flexi News™
Cross category single
B001765
