Finally place the divider (
I
) in the 140mm deep
top shelf (
H
). The display is now complete and
ready to be merchandised.
Tel: 0113 244 5524 Fax: 0113 244 6664 email: sales@bartuf.com web: www.bartuf.com
All dimensions are approximate and may be subject to change.
All drawings and designs are protected by design right and copyright©
Patents GB 2293538B.GB 2317328 US 6,112,912
7.
8.
9.
10.
11.
Take the pre-assembled 3 tier shelf (
F
) and
locate it between the 4 tier module on the right
and the body panel on the left. Snap the shelf (
F
)
into place with the slots on the shelf locating with
the metal studs on the body panels.
Take the small news shelf (
G
) and position over the
metal studs on the left hand panel of the existing
display (
B
) and the insert panel (
D
).
Guide the slots onto the metal studs. Push down
and pull towards the front until the shelf ‘snaps’
into place.
Install the 140mm shelf (
H
) on the top set of
metal studs and snap in place as shown in
step 9.
B
G
H
I
G
G
i.PUSH
DOWN
ii.PULL
DOWN
