3) Speed Menu appears.
Press the A or B-Key to change the speed by 10 rpm step.
Press and hold the C-Key and then press A or B-Key to change the speed by
50 rpm step.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
4. Trace
4-1. Trace
*Be sure the Frame Limit parameters in the MC (Machine Condition) are correctly set
before using this feature.
The Pantograph traces a rectangle to see if the
machine is sewing at the right position and right size.
This feature is only available in Drive mode BEFORE sewing begins.
*The rectangle refers to the Programs (Scale, Rotation, Matrix and etc).
1) Press the D-Key.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
2) The Trace Screen appears.
The border
Line of the
area can be
sewn
The design
to be sewn
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
The screen shows whether the design fits into the bordered area.
9－3
Summary of Contents for BEVT Series
