3) The design moves as the Pantograph moves with the Jog Keys.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
The Border Line is normally blue.
The line turns yellow then red, as the design gets closer to the border line.
4) Press the A-Key to start the Trace.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
*If the design does not fit within the border, the machine makes a beep and stops
the trace in that direction. Re-position the pattern or resize the design so that
it fits within the border.
4-2. Outline Trace
*Be sure the Frame Limit parameters in the MC (Machine Condition) are correctly set
before using this feature.
The Pantograph traces the outline of the design to see if the machine is
sewing at the right position and right size.
This feature is only available in Drive mode and BEFORE sewing begins.
*The outline refers to the Programs (Scale, Rotation, Matrix and etc).
1) Press the E-Key to start the Outline trace.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
*If the design does not fit within the border, the machine makes a beep and stops
the trace in that direction. Re-position the pattern or resize the design so that
it fits within the border.
9－4
Summary of Contents for BEVT Series
