12) Other Functions
a. The controller allows cycle embroidery 1-200 or infinite (Setting : 201)
b. Automatic design conversion for socks.
c. Automatic layout for the Matrix embroidery
Creates a pattern arrangement controlling the number of times a pattern
will sew horizontally and vertically and amount of space between each.
d. The colors (Needle No.) in a design can be easily changed and saved.
13) Start position
The start position of a pattern is saved.
14) Trace
The area to be sewn is shown on the screen and traced out by the pantograph.
15) Stitch Back Feature
Repairs stitches using the Stop key, stop the machine using the stop key, hold
down the stop key till the pantograph reaches the desired position, and then
let go.
Press it again to stop the pantograph.
16) Automatic speed control, Jump
The controller varies the speed of the machine automatically depending on the
setting and stitch length to have better stitch quality. The controller gives
automatic Jump Stitches as the stitch length reaches to set value. It also
creates higher stitch quality.
17) Float
The pantograph can be moved without sewing to have the designated position to
start sewing.
It also can move the pantograph directly to the designated position by typing
in the stitch count.
18) Error Code
Errors are displayed on the screen in icon form.
19) Stand-By(Resume)
The machine can be turned OFF in the middle of a design. The machine resumes in
the position where embroidery is stopped.
2－4
Summary of Contents for BEVT Series
