Leveling
After placing the machine on its work table, make certain it is level. It may be necessary to
adjust the leveling feet to prevent the machine form rocking back and forth. Using a bubble
level, make sure the machine is as level as possible, checking it from side to side and also
front to back.
Grounding Instructions
See Important Safety Instructions in the Overview chapter. This product must be grounded. In
the event of malfunction or breakdown, grounding provides a path of least resistance for
electric current, to reduce the risk of electric shock.
This product is equipped with a cord having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
DANGER! Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. The conductor with insulation having
an outer surface that is green, with or without yellow stripes, is the
equipment-grounding conductor. If repair or replacement of the cord or
plug is necessary, do not connect the equipment-grounding conductor to a
live terminal.
Check with a qualified electrician if grounding instructions are not completely understood, or
if in doubt as to whether the product is properly grounded. Do not modify the plug provided
with the product. If it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
This product is for use on a nominal 120V circuit, and has a grounding plug that looks like
the plug (A) illustrated on the following page. A temporary adapter, which looks like the
adapter illustrated in sketches B and C, may be used to connect this plug to a 2-pole
receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary
adapter should be used only until a properly grounded outlet can be installed by a qualified
technician. The green colored rigid ear, lug, and the like, extending from the adapter must be
connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by the metal screw.
1-3
Machine Basic
s
BE
V
T Series
Mechanical
Guide
Summary of Contents for BEVT Series
