5. Frame Change
Frame Change moves the pantograph forward to allow framing or postioning of
an appliqué.
1) Press the Menu Key to display “Menu 1” as below.
2) Press the D-Key.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
3) Press the C-Key.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
4) The Start Switch message appears.
Press the Start-Key
to move the pantograph to the position pre-set.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
Press the C-Key to go back to previous screen
5)
Press the C-Key to go back to previous screen without moving the pantograph.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
6. Bobbin Counte r
Bobbin Counter stops the machine when a preset number of stitches is reached.
By setting the number of stitches where a particular design normally runs out of bobbin,
Bobbin can be replaced, avoiding missed stitches in a production piece.
When the machine stops for the bobbin, it shows the message and the green LED on
the Tension Box is lit.
Note : Set the counter at 0 to cancel the Bobbin Counter feature.
4－6
Summary of Contents for BEVT Series
