1. Before Loading
Operations to be executed before loading a design.
Loading by ABC and COM are not available with the LAN port connection.
1) Selecting the device to load from
Press the A-Key to choose a device.
ABC → COM →
JOG
→ ABC
The icon above A-Key shows the selected device.
The selected device is shown in the upper left hand corner of the screen.
2) Choosing a design
*Same procedure as saving design.
The list of the designs on the FD or on the machines Memory displays during
this operation.
Use the Jog Keys to select the design.
Cursor Up
Next Page
Previous Page
Cursor Down
Designs in Memory
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
3) Pause, Cancel Same procedure as when saving designs.
The loading can be paused or canceled.
a) Press the E-Key during the loading to pause it.
(A-Key) (B-Key) (C-Key) (D-Key) (E-Key)
*Hold the E-Key if it does not pause.
5－2
Summary of Contents for BEVT Series
