No.& Icon Item
Function
Range
Default
7
Appliqué
When the controller finds
the “STOP” code, the
Pantograph automatically
moves as programmed in
the following 2
parameters.
1 : Active
0 : Inactive
0
8
A. H. Offset
When the “Appliqué”
parameter is active (1),
the pantograph comes out
(H,Positive) and moves
to Right
-3000 to 3000mm
0mm
(V,Negative) as much as
the value set.
9
A. V. Offset
When A. V. Offset is
“0”, the Pantograph
does not move to side.
10
Frame
The Pantograph offset at
the end of the design.
1 : Active
0 : Inactive
0mm
11
F. H. Offset
When the “Frame”
parameter is active,
the Pantograph comes out
(H, Positive) and moves
to Right
-3000 to 3000mm
0mm
(V, Negative) .
12
F. V. Offset
13
Cap frame setting.
CAP Frame
The settingautomatically
changes the speed of the
machine and rotates the
design 180 deg.
0 : standard
1-3 : Cap Frame
0
14
Frame Type
Choosing the Sub-Soft
Limit. 0 for not using
it.
0 - 3
0
8－10
Summary of Contents for BEVT Series
