Configuration through web interface
–
65
Lock Name #1: The name displayed near the first lock button.
Default value: Enable/disable the function to send a standard value when the button to open the
first lock is pressed (the internal protocol command to open the door).
Lock code #1: DTMF code transmitted when the first lock button is pressed.
Second lock: Turn on/off the button of the second lock, for example when using the SH-42
module or the AV-07T panel.
Lock Name #2: The name displayed near the second lock button.
Lock code #2: DTMF code transmitted when the second lock button is pressed.
Advanced intercom settings
Camera: Turn on / off the monitor camera.
Auto hung up after lock opening:
Automatically end a call 3 seconds after pressing the "Open" button during
a call or before answering a call.
Answerphone: The function of the automatic reception of a call by the monitor after 20 seconds
of not responding to a call to record a video message.
By default, panels are set to open the door when there is "#" DTMF code received to
open the first lock.
By default, panels are set to open the door when there is "0" DTMF code received to
open the second lock.
