Base aire AirWerx 90, Installation & Operation Manual

9

Dehumidifier Storage

If the unit will be stored for an extended period of time, complete the following steps:

1. Turn off the unit and allow to dry.
2. Wrap and secure the power cord.
3. Cover the filter mesh.
4. Store in a clean, dry space.

Ducted Applications

Ducting the dehumidifier allows the unit to be in one room while conditioning an adjacent room. The 
inlet/ return collar ( optional accessory, PN: W-103) is designed for 12" flex ducting while the supply 
grille is designed for 6" flex ducting.
Be sure to secure the ducting with tie wrap. Also, keep in mind, that the supply ducting can be 
screwed into an adapter if necessary.

Ducting Installation

·Maximum total length of duct run= 10’

·

To connect 12"return ducting. it may be helpful to:

2. Connect duct to inlet grille.

3. Reconnect inlet grille to end cap.

Note: The supply duct adapter is standard on all units. Return duct is an optional accessory.

·

Maximum length if only ducting inlet or outlet= 6'

1. Remove inlet grille from end cap.

Installing Duct Adapter

To

install

adapter

, 

line

duct

up

with

holes

on

the

side

of

unit

push up from the base of the

adapter.

Removing Duct Adapter

If it is necessary to remove the 

adapter, place

hand

at

bottom

of

the

adapter

and  use

your

fingers

to

pull

out

and

down. This

will

remove

the

cover

hooks

from the

machine.

Electrical Access

·Unscrew the 4 screws on the side panel to access the 
control board

.