background image

1. 

Once receive the goods, customers must log in www.

baseaire.

com to fill out the warranty Registration form 

and submit to 

BaseAire

 company. We will receive your purchasing and installation information and save it.

6. After parts are repaired or replaced by 

BaseAire

, the original warranty period continues to applies until meet 

its deadline. No extensions to the original warranty period.

3. If customer cannot return unit to certified repair center, all costs associated with freight shipment are borne by 
the customer. In addition, all duties related to freight shipments, including but not limited to palletizing, wrapping, 
labeling and pickup are associated with customer.

2. 

Removal and re-installation of unit is the sole responsibility of owner.

1  YEAR  (  FROM  DATE  OF  PURCHASE): 

BaseAire

  warrants  the  dehumidifier  will  operate  free  of  defects  in 

workmanship  and  materials. At  its  discretion, 

BaseAire

  will  repair  or  replace  any  malfunctioning  components, 

free of charge (excluding transportation costs)

BaseAire

 Warranty Steps:

4. 

If shipped, customer is responsible for all risk of loss or damage.

If  no  warranty  registration  is  sent  to  us,  warranty  period  will  begin  the  day  the  shipment  left  the  warehouse. 
Please  be  sure  to  record  serial  #  and  date  of  installation.  You  will  need  this  information  to  receive  the

 

RA

 

number.

4.  Customers  can  pick  up  the  unit  after  repair  at  their  own  expense  for  shipping.  Units  will  have  a  rigorous 
testing before sending it back to customers.

3. After  the  unit  has  been  received  by 

BaseAire 

(whether  at  a  repair  center  or  the  warehouse), 

BaseAire

  will 

have an initial inspection If it is determined to be invalid warranty claim (

see

 exclusions below), customers have 

to pay for all associated repair costs and shipping costs for units repai

r

.

All warranty benefits apply to the original owner only. Warranty cannot be transferred or assigned.

5 YEARS (FROM DATE OF PURCHASE): 

BaseAire

 warrants  the compressor, condenser, and  evaporator  will 

operate  free  of  any  defects  in  material  or  workmanship.  At  its  discretion, 

BaseAire

  will  repair  or  replace  the 

defective parts. This does not include labor, transportation, or refrigerant.

2. If warranty service is necessary, customers must contact 

BaseAire

 Tech Support by sales@

baseaire.

com or 

local  technical  service  phone  to  receive  a  Return Authorization  (RA  number).  Once  an  RA  has  been  issued, 
customers should bring the unit to a certified repair center. 

BaseAire

 wi

ll

 arrange the shipping to bring the unit 

back to the 

BaseAire

 warehouse (at the expense of the customers) if customers are not available.

Limited Warranty

3 YEARS  (FROM  DATE  OF  PURCHASE): 

BaseAire

  warrants  the  refrigeration  circuit  (compressor,  condenser 

and evaporator) will operate free of defects in material or workmanship. At its discretion, 

BaseAire

 will replace 

defective parts, including factory labor or refrigerant. This does not include transportation.

1. Customer must provide normal care and maintenance (including, but not limited to cleaning filters, coils and 
pumps)

CUSTOMER RESPONSIBILITIES: In order to take advantage of the warranty service, the customer must do the 
following:

5. If the unit can no longer be fixed, and it is in the warranty period and determined to be valid claim, we will ship 
the customer a new unit within the same year warranty from the date of replacement.

12

Summary of Contents for AirWerx 90

















Reviews: