• Make sure stoves is cool.
• Move stoves away from flame
(Including pilot lights) and other
ignition sources
• Remove propane cylinder from regulator
and replace protective cap on cylinder
• Remove regulator from stoves
• Lift off grate
Standard Ignition Stoves
To Light (Continued)
Set stove on sturdy, flat surface. For
outdoor use only.
Hold lit match
near burner and
open burner
valve.
#F235744 3 Burner Propane Stove
2.
1.
Peizo Ignition Stoves
Set stove on sturdy, flat surface. For
outdoor use only.
Select the burner to be ignited and
slowly turn the gas control in a counter-
clockwise direction approximately
¼ of a turn.
#F235782 3 Burner Deluxe Propane Stove
2.
1.
Depress the
Piezo button
firmly to get a
spark from the
electrode
positioned
above the
burner.
3.
Adjust flame with burner valve. Flame should
be blue with a hint of yellow in the tips.
4.
To Turn Off
With the flame still operating, turn the gas
control knob in the clockwise direction until
they are firmly “Off”. Allow the flame to burn
down then extinguish once all remaining gas in
the system has been used.
To Clean
• Keep stove areas clean and free from
combustible materials, gasoline and
other flammable vapors and liquids
• Do not obstruct the flow of combustion
and ventilation air
• A good flame should be blue with
minimal yellow tips on ends of flames.
Some yellow tips on flames are
acceptable as long as no carbon
or soot deposits appear.
• Wipe clean with soft cloth and mild
dish detergent. Do not use abrasives.
Maintenance
If Piezo does not light burner on first try, close
gas control, wait 10 seconds and go back to
step 2.
5.