SANIDRY CSB INSTALLER'S AND OWNER'S MANUAL
2
SaniDry CSB Installer’s & Owner’s Manual
3
SaniDry CSB Installer’s & Owner’s Manual
Table of Contents
Precautions ...............................................................................1
1. Intended Application ..............................................................2
2. Registrations .........................................................................2
3. Specifications ........................................................................3
4. Unit Assembly ........................................................................3
4.1 Installing Feet ......................................................................3
4.2 Attaching Drain Hose ...........................................................3
5. Installation .............................................................................3
5.1 Location ..............................................................................3
5.2 Electrical Requirements .......................................................4
5.3 Condensate (Water) Removal ...............................................4
6. Operation ...............................................................................4
6.1 Humidity Control Adjustment ...............................................4
6.2 Defrost Cycle .......................................................................4
6.3 Blower (Fan) Switch .............................................................4
7. Maintenance ..........................................................................5
7.1 Air Filter ...............................................................................5
7.2 Cleaning and Replacement ..................................................5
7.3 Removing Filters ..................................................................5
7.4 Installing Filters ...................................................................5
8. Service ..................................................................................5
8.1 Technical Description ...........................................................5
8.2 Troubleshooting ...................................................................6
9. Accessory/Replacement Parts ................................................6
Warranty .....................................................................................7
Precautions
• Do not operate the unit with a cut or frayed power cord.
• Do not unplug the unit by pulling on the cord. Grasp the plug
firmly and pull it out of the wall socket or power receptacle.
• Always use a grounded outlet.
• Never operate electrical equipment near or in standing water.
• Do not stick your fingers or other objects through the safety grills.
• Do not restrict airflow into or out of the unit. This may cause the
unit to overheat.
• Unit should never be serviced or cleaned while it is plugged in.
• Do not sit or stand on the unit or use as a shelf or table.
• Before leaving the SaniDry CSB unattended, ensure children do
not have access to the equipment. Do not allow children to play
with or near the unit or in its air flow.
• The SaniDry CSB is designed to be installed indoors only.
Read the installation, operation and maintenance instructions
carefully before installing and using this unit. Proper adherence to
these instructions is essential to obtain maximum benefit from your
Santa F.e dehumidifier.
Read and Save These Instructions
WARNING!
— This symbol means important
instructions. Failure to heed them can result in serious
injury or death.
CAUTION!
— This symbol means important
instructions. Failure to heed them can result in injury or
material property damage.
1. Intended Application
The SaniDry CSB is intended for installation in crawl spaces or
basements that experience short or long-term high humidity
conditions; however, the attractively designed unit can be placed in
almost any residential setting where dehumidification is desired. Use
in non-residential applications and pool areas will void warranty.
The SaniDry CSB is designed to operate in temperatures between
56° and 95°F. Temperatures outside of these ranges may affect
dehumidifier performance.
In order to efficiently control the humidity levels, the area in which
the dehumidifier is to be placed must be free of water intrusion or
excessive fresh (outside) air infiltration. Before installing the SaniDry
CSB, water intrusion and air infiltration problems should be addressed.
2. Registration
The SaniDry CSB conforms to UL STD 474 and CSA standard C22.2 No. 92
3. Specifications
Part Number:
4025701
Blower:
240 CFM @ 0.0" WG
Power:
700 watts @ 80°F and 60% RH
Supply Voltage:
115 volt – 1phase – 60 Hz
Current Draw:
5.9
Amps
Energy Factor:
2.60 L/kWh
Operating Temp.:
45°F Min., 95°F Max.
Sized for:
2200 Sq. Ft. - Typical
Miniumum Performance at 80°F and 60% RH
Water Removal:
90 Pints/Day
Efficiency:
5.5 Pints/kWh
Air Filter:
MERV-11
Efficiency:
Standard 65% Efficient, ASHRAE Dust Spot Test
Size:
Size: 12" x 12" x 1"
Power Cord:
9', 110-120 VAC, Ground
Drain Connection:
5/8" hose barb or 3/4" FPT
Drain Hose:
5/8" ID x 8' Direct Gravity Drain Hose
SaniDry CSB Dimensions
Unit
with Duct Kit:
Shipping
Width:
14-1/2"
14-1/2"
22"
Height: 19" w/o feet
22-1/4" w/o feet
25"
Depth:
33"
40-3/8"
39"
Weight:
71 lbs
78-1/2 lbs
