• Do not hang any objects on the lamp, even if it is only decoration. Do not cover
the light.
• Before installing or replacing the lamp disconnect the luminary from the power
supply.
• Never reach into the E27 lamp socket, there is a risk of electric shock!
• The weight of this lamp is higher than normal incandescent lamp, attention should
be drawn to fact that the increased weight may reduce the mechanical stability of
certain luminaires.
• If the product is damaged (e.g. broken enclosure), power must be disconnected
from the E27 lamp socket. For this purpose, turn off the circuit breaker. Before
approaching the lamp verify that circuit is not powered using a suitable voltage
detector.
• Do not use this product in hospitals or medical facilities. Although the radio signals
emitted by the remote control are quite weak, they might cause functional impairment
of life-support systems nearby. The same could also apply to other facilities.
• In rare cases, light impulses can cause epileptic phenomena. If dizziness, muscle
twitching and/or loss of perception occurs, consult a doctor immediately.
• The LEDs of the lamp are not replaceable.
• Attention, LED light:
-
Do not look directly into the LED light!
-
Do not look into the beam directly or with optical instruments!
• This product should not be used with an external dimmer.
• Consult an expert when in doubt about the operation, safety or connection of the
product.
•
Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Batteries
• Correct polarity must be observed while inserting the battery.
• The battery should be removed from the device if it is not used for a long period of
time to avoid damage through leaking. Leaking or damaged batteries might cause
acid burns when in contact with skin, therefore use suitable protective gloves to
handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying
around, as there is risk, that children or pets swallow them.
•
Batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge non-rechargeable batteries. There is a risk of explosion!
Installation
• Make sure the luminary is disconnected from the power supply.
• Gently screw in the lamp into the E27 lamp holder. Do not over-tighten.
• Switch the power back on and use the
ON
button on the remote control to switch the lamp on.
Operation
Using remote control
• This remote control comes with a pre-installed battery. To activate the remote control, remove
the plastic tag.
• Point the infrared sensor on the remote control in the lamp direction.
The remote control features a range of max. 7 m. Any objects located between the
remote control and the lights will reduce the range.
For item no. 1507021:
If 3 lamps are installed close to each other (within remote
control range), then all of them will be simultaneously controlled by the remote control.
Button
Feature
Increase brightness: 25% → 50% → 75% → 100%.
Decrease brightness: 100% → 75% → 50% → 25%.
ON
Switch light on
OFF
Switch light off
R
Select RED colour
G
Select GREEN colour
B
Select BLUE colour
W
Select WHITE colour
Operating instructions
LED RGB lamp
Item no. 1507020
Item no. 1507021, set of 3
Intended use
This LED RGB lamp and remote control set is intended for household decoration and light play.
It is designed to be used with luminaries with a standard E27 lamp socket. With the provided
remote control you can choose your favourite colour setting and dim level.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
•
LED lamp - item no. 1507020 / 3x LED lamps - item no. 1507021
• IR remote control (incl. battery)
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
The product must only be used in dry, enclosed indoor areas. The product must not
become damp or wet, otherwise there is a risk of a fatal electrical shock!
This symbol indicates that this product should not be used with an external dimmer.
This symbol reminds you to read the operating instructions included with the
product.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• This product is not a toy and should not be used or installed by children.
•
Keep the product away from flammable materials (e.g. curtains and paper), liquids
(e.g. petrol) and gases, as these present a fire hazard.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other products which are
connected to the product.
