Care and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solu-
tions as they can cause damage to the housing and malfunctioning.
• Disconnect the product from the mains socket and disconnect all connected devices before
you start cleaning it.
• The product requires no maintenance; Do not take it apart.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the envi
-
ronment.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. *2347563_v1_0221_02_mh_dh_en
Technical data
a) Product
Rated input ................................... 200 - 240 V/AC 50 - 60 Hz, 4.5 A
Output voltage range .................... 0 – 30 V/DC (variable)
Output current range .................... 0 – 20 A (variable)
O.V. Set (potentiometer) ............... 5 - 35 V/DC, 33.5 V/DC (factory setting)
Power output ................................ max. 600 W
Display accuracy .......................... ±0,5% ±1 digits
Operating time .............................. max. 24 h (uninterrupted)
Fuse .............................................. F10 A, 250 V/AC
Protection class ............................ I
Power cord length ......................... 1.5 m
Protection ..................................... overload, over-current, short-circuit, over-temperature,
over-voltage.
Operating temperature/humidity ...
0 to +40 ºC, ≤80% RH
Storage temperature/humidity ......
-10 to +70 ºC, ≤70% RH
Dimensions (L x W x H) ................ 320 x 200 x 152 mm
Weight .......................................... 2.9 kg
b) Output voltage
No-load .........................................
≤0.5 % ±100 mV
Load..............................................
≤1 %
Residual ripple ..............................
≤200 mVp-p
c) Output current
No-load .........................................
≤0.5 % ±100 mA
Load..............................................
≤1 %
Residual ripple ..............................
≤200 mAp-p