C
BASi | Epsilon EClipse
POWER
The Epsilon EClipse™ system requires a grounded power supply, providing either 120 or 240 V at 50/60 Hz. Before
connecting the power cord, check that the indicator next to the power connection shows the correct voltage
(Figure 1).
FIGURE 1 POWER CONNECTION
If the indicator does not show the correct voltage, DO NOT TURN POWER ON. See the manual for full instructions to
change setting.
SOFTWARE INSTALLATION
If you bought the Epsilon EClipse™ with a computer from BASi, the software is installed on the computer. Simply
unpack and set up the computer.
If you are going to use a computer not supplied BASi, then you will have to install the software on your computer.
The Epsilon EClipse™ system requires a computer running Windows 7 or later. Connect a standard USB cable
between any USB port on the computer and the USB port on the back of the Epsilon EClipse™. The Epsilon EClipse
software is included on a USB stick with each purchase. For the most up-to-date version of the software, please
email ec@basinc.com.
Follow the instructions as they appear on the monitor.
The minimum PC requirements are:
Windows 7 or newer
USB port
QUICK START GUIDE
