background image

Operator Manual - 

Shop Dragon 

 Wet/Dry Vacuums 

 

IMPORTANT SAFETY INSTRUCTIONS 

 
When using an electrical appliance, basic precautions should always be 
followed, read all instructions before using. 
 
! WARNING! 
To reduce risk of fire, electric shock, or injury: 

 

Do not leave the machine when it is plugged in.  Unplug the unit from 
the outlet when not in use & before servicing. 

 

 

To avoid electric shock, do not expose machine to rain.  Store indoors. 

 

 

Do not allow to be used as a toy.  Close attention is necessary when 
used by or near children. 

 

 

Use only as described in this manual.  Use only manufacturer’s 
recommended attachments. 

 

 

Do not use with damaged cord or plug.  If machine is not working as it 
should return it to a service center for inspection. 

 

 

Do not pull or carry by cord, use cord as a handle, close a door on a 
cord, or pull cord around sharp edges or corners.  Do not run machine 
over cord.  Keep cord away from heated surfaces. 

 

 

Do not unplug by pulling on cord.  To unplug, grasp the plug, not the 
cord. 

 

 

Do not handle plug or machine with wet hands. 

 

 

Do not put any foreign object into openings.  Do not use with any 
opening blocked; keep free of dust, lint, hair, & anything that may 
reduce airflow. 

 

 

Keep hair, loose clothing, fingers, & all parts of body away from 
openings & moving parts. 

 

 

Turn off all controls before unplugging. 

 

 

Do not use in or around flammable or combustible liquids such as 
gasoline or use in areas where they may be present. 

 

 

Connect to a properly grounded outlet only.  See grounding 
instructions. 

 

Summary of Contents for Shop Dragon 10









Reviews: