Operator Manual -
Shop Dragon
Wet/Dry Vacuums
GROUNDING INSTRUCTIONS
This machine must be grounded. If it should electrically malfunction,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. This machine is equipped with a cord having an
equipment-grounding conductor & grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed & grounded in
accordance with all local codes & ordinances.
! DANGER!
Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or service person
if you are in doubt as to whether the outlet is properly grounded. Do not
modify the plug provided with the machine. If plug will not fit the outlet,
have a proper outlet installed by a qualified electrician.
Replace the plug if the grounding pin is damaged or broken.
Extension cords connected to this machine should be 12 gauge, 3-wire
cords with 3-prong plugs & outlets. DO NOT use extension cords more
than 50 feet long.
PREPARING THE MACHINE FOR OPERATION
! WARNING!
This machine contains moving parts. To reduce the risk of injury, always
unplug the power cord before servicing.
Unwrap the power cord completely & plug into a properly grounded outlet.
For wet pick up install head gasket and ring.
For dry pickup install cloth filter bag. (Optional paper bag and/or cartridge
may also be used.)
Attach swivel hose connector and hose to tank inlet.
Select proper floor tool. Wet squeegee for wet pick up. Dry floor tool for dry
pick up. Install selected tool on 2-bend wand.
Turn switch located on vacuum head to on position.
You are now ready to begin your cleaning task.
