Bask Mistmaster
®
3-in-1 Compact Misting System: Mist Station Kit Instructions
v.210119
Page
20
of
20
5.
Press and hold the Mix Button (16) for approximately one minute to ensure the treatment is evenly mixed in
the tank.
6.
Power OFF your Mistmaster unless you are ready to start misting.
Note: When operating a Mist Station remotely, DO NOT power OFF your Mistmaster; the power must remain
on so you can activate the device via Long-Range Remote Control.
WARNINGS
–
FILLING THE TANK
Do not overfill the tank; overfilling wastes treatment and the overflow could potentially
contaminate areas not intended for exposure to the treatment and cause unnecessary contact
with treatments.
Use the strainer to prevent leaves, twigs, insects, and other foreign objects from falling into the
tank and potentially interfering with the operation of your Mistmaster or permanently damaging
the device. Pour treatment and eventually potable water through the strainer into the tank. The
strainer also creates a seal between the tank and the Fill Cap (1). Always keep the strainer in
place to prevent fluid from leaking from around the bottom of the Fill Cap (1).
Do not insert a water hose into the tank, as this can result in siphoning of treatment back into
the water supply. Instead, fill a gallon jug or other container with clean, potable water so you
can easily pour the desired amount into the Mistmaster tank.
To avoid injury, contamination, and/or damage to property and equipment, always read,
understand, and follow the precautionary statements on the product label and insert prior to
handling any treatment. Instructions may include the use of gloves, eye protection, mask, or
other Personal Protective Equipment (PPE) to protect your skin, eyes, mouth, and lungs.
CHEMICAL SAFETY INSTRUCTIONS AND WARNINGS
Use only treatments selected for use in the Bask Mistmaster
®
3-in-1 Compact Misting System.
Read, understand, and follow instructions provided with treatments selected for use in the Bask
Mistmaster
®
3-in-1 Compact Misting System. Each chemical treatment has specifications for the
use of appropriate personal protective equipment you must use to protect your skin, eyes, mouth,
and lungs. When in doubt, heed all warnings and exercise all precautions.
Users are responsible for the safety of themselves, others, and the environment. Dispose of
unused chemicals and chemical containers properly to avoid harming others or contaminating the
environment.
To avoid overtreating an area, follow manufacturer’s instructions on the label of the treatment
you are misting to determine the coverage area for the volume of treatment in your Mistmaster.
Plan your misting path and walking speed in advance to apply the right amount of treatment for
the size of the area you are misting.
To avoid unnecessary contact with mist treatments, avoid walking into, under, or through the mist
or recently misted areas; read product labels and inserts to determine when it is safe to enter the
treated area.
Read and follow the chemical manufacturer’s instructions for washing skin, hair, and clothing after
contact or exposure.
Always read and observe all re-en
try times for humans and pet (if any) listed on the chemical’s
label.
