Bask Mistmaster
®
3-in-1 Compact Misting System: Mist Station Kit Instructions
v.210119
Page
9
of
20
4.
Mount each Riser to its base. For Slim Risers, push the bottom of the copper pipe onto the Base. For Ultra-Slim
Risers, push the riser body into the Tee.
5.
Using the 50-feet of Tubing provided in your kit, run the Tubing along the ground beginning at your Mistmaster and
continuing to each Riser. Leave enough slack so the Tubing lies flat on the ground without pulling on the Risers; do
not allow Tubing to create loops or kinks. See illustrations of a typical Mist Station Riser Kit installations below.
Slim Riser (Copper)
Ultra-Slim Riser (316 Stainless Steel)
Each Slim Riser is preassembled with a Mist
Nozzle and Tubing running from the Mist Nozzle
through the Riser Body and extending out
through the side at the bottom; a Tee is
connected to the end of the Tubing.
Each Ultra-Slim Riser is preassembled with a Mist
Nozzle and a Tee at the bottom of the stainless-
steel pipe.
