Bask Mistmaster
®
3-in-
1 Compact Misting System User’s Guide
v.210119
Page
4
of
20
Additional Features and Specifications
−
One gallon (useable) capacity tank with a mixing feature
−
Removable strainer
−
High-pressure pump
−
High-efficiency blower
−
Powerful, rechargeable battery
−
Rugged, high-impact, UV-resistant enclosure
−
Comfort-grip rubber handle and rubber feet
−
~17.25 lbs. (~8.2 kg) empty tank weight; up to 28 lbs. (~12.7 kg) filled tank weight
−
~14.6 inches long (~37.1 cm) x 6 inches wide (~15.2 cm) x ~16.2 inches high (~41.1 cm)
−
Accessories sold separately. Visit www.bask-solutions.com for more information
−
Operating temperature range: 34° F
–
104° F
Mistmaster Status Indicators Guide
The three Status Indicators (5) on the top of your Mistmaster indicate the approximate level of fluid in the tank as well
as other feedback.
Tank Level Upper Half:
When the
two outer indicators
are lit and steady,
your tank fluid level is
between medium and high.
Tank Level Lower Half:
When the
middle indicator
is lit and steady,
your tank fluid level is between
low and medium.
Low Fluid:
When all
three indicators begin to flash,
your
Mistmaster is shut down due to low
fluid
. You will need to add fluid to the device to continue using it.
Low Battery:
When the
two outer indicators begin to flash
, your
Mistmaster is shut down due
to low battery
. You will need to charge the device to continue using it.
Low Temp:
When the
middle indicator begins to flash
, your
Mistmaster is shut down due to
freezing temperatures
. You will need to bring device into an environment that is above freezing
temperature immediately to prevent damage.
If you own a Mistmaster Long-Range Remote-Control, the Status Indicators (5) will also display the following condition
during a successful pairing. Refer to the
Mistmaster Long-Range Remote-Control Instructions
for complete pairing
procedures.
Successful Pairing:
outer indicators and the middle indicator begin to flash in an alternating
sequence when pairing is successful. (If indication is not present after pairing attempt, repeat
the pairing procedure)
