BE1-50/51B
8
Printed in U.S.A.
Printed in U.S.A.
Printed in U.S.A.
Printed in U.S.A.
Printed in U.S.A.
Route 143, Box 269, Highland, Illinois U.S.A. 62249
Tel +1 618.654.2341 Fax +1 618.654.2351
e-mail: info@basler.com
No. 1300 North Zhongshan Road, Wujiang Economic Development Zone
Suzhou, Jiangsu Province - P.R. China 215200
Tel +86(0)512 6346 1730 Fax +86(0)512 6346 1760
e-mail: beichina@basler.com
www.basler.com
P.A.E. Les Pins, 67319 Wasselonne Cedex FRANCE
Tel +33 3.88.87.1010 Fax +33 3.88.87.0808
e-mail: beifrance@basler.com
NOTES
STANDARD ACCESSORIES:
A test plug is available to allow testing of the relay without
removing external wiring.
Order test plug: Basler part number: 10095.
ORDERING INFORMATION
All units are self powered and supplied with 10 switch
selectable curves, TIME and INST functions and outputs,
magnetically latched targets, and an auxiliary output
contact.
ORDERING
MODEL NUMBER
BE1-50/51B Time Overcurrent Relay
Table 3.
MODEL NUMBER
NEW INSTALLATION PACKAGES
For 5 Amp System CT Secondaries
Semi-Flush Mounting, A1 Size Case
BE1-50/51B-105
Drawout Construction, Testable-in-Case
BE1-50/51B-205
Projection Mounting, S1 Size Case
BE1-50/51B-106
Drawout Construction, Testable-in-Case
BE1-50/51B-206
Semi-Flush Mounting, S1 Size Case
BE1-50/51B-107
Drawout Construction, Testable-in-Case
BE1-50/51B-207
For 1 Amp System CT Secondaries
Semi-Flush Mounting, A1 Size Case
BE1-50/51B-101
Drawout Construction, Testable-in-Case
BE1-50/51B-201
Projection Mounting, S1 Size Case
BE1-50/51B-102
Drawout Construction, Testable-in-Case
BE1-50/51B-202
Semi-Flush Mounting, S1 Size Case
BE1-50/51B-103
Drawout Construction, Testable-in-Case
BE1-50/51B-203
HOW TO ORDER:
Designate the Model Number and the three-digit dash number
from Table 3 to define the configuration desired.
Model numbers ending in 200 series include memory to replicate the decaying reset characteristic of electro-mechanical
relay disks even while the input current is zero. Model numbers ending in 100 series reset instantaneously (regardless
of settings) when the input current drops below the minimum TOC pickup value.
