1-6
BE1-67N General Information
9190700990 Rev F
Operate Time Repeatability
Operate time is repeatable within
±
2% or 25 ms, whichever is greater.
Instantaneous Overcurrent
Pickup Range for Directional and Non-Directional Instantaneous Elements
Sensing Input Range 1 and 2:
2 to 100 Aac
Sensing Input Range 3 and 4:
0.4 to 20 Aac
Maximum Operate Time
Maximum operating times are derived while
stepping from a steady state (normal conditions)
to an overcurrent condition. When stepping from
an inhibit state, the maximum times are longer.
Table 1-1 lists the instantaneous operate times
for multiples of pickup.
Table 1-1
. Maximum Operate Times
Multiple of Pickup Operate Time
1.05 Aac
100 ms
2.0 Aac
35 ms
5.0 Aac
20 ms
Pickup Accuracy:
Within
±
5% of the defined pickup setting
Repeatability:
±
5%
Response Time:
Within 25 ms to a current reversal after fault inception
Power Supply
Relay operating power may be obtained from a wide variety of external sources. When ordering, any one
of five internal power supply types may be selected to match the operating power voltage level available
at your site. Available power supply types are listed in Table 1-2.
Table 1-2. Power Supply Types and Ratings
Input Voltage
Type
Nominal Range
Burden at Nominal
J (mid range)
125 Vdc
120 Vac
24 to 150 Vdc
90 to 132 Vac
2.9 W
12.8 VA
K (mid range)
48 Vdc
24 to 150 Vdc
2.7 W
L (low range)
24 Vdc
12 to 32 Vdc
∗
2.8 W
Y (mid range)
48 Vdc
125 Vdc
24 to 150 Vdc
24 to 150 Vdc
2.7 W
2.9 W
Z (high range)
250 Vdc
240 Vac
68 to 280 Vdc
90 to 270 Vac
3.1 W
22.0 VA
∗
Type L power supply may require 14 Vdc to begin operation. Once operating, the voltage may be
reduced to 12 Vdc.
Output Contacts
Resistive Ratings
120 Vac:
Make, break, and carry 7 Aac continuously
250 Vdc:
Make and carry 30 Adc for 0.2 s, carry 7 Adc continuously, and
break 0.3 Adc
500 Vdc:
Make and carry 15 Adc for 0.2 s, carry 7 Adc continuously, and
break 0.3 Adc
Inductive Ratings
120 Vac, 125 Vdc, 250 Vdc:
Break 0.3 A (L/R = 0.04)
Summary of Contents for BE1-67N
