manualshive.com logo in svg

Basler BE1-951, Instruction Manual

The Basler BE1-951 Instruction Manual provides detailed guidance on how to maximize the functionality of this advanced product. Easily download the manual for free from 88.208.23.73:8080 to unlock the full potential of your Basler BE1-951. Ensure proper installation and operation with this essential user manual.

Share
Download
background image

BE1-951

Application

i

SECTION 8 • APPLICATION

TABLE OF CONTENTS

SECTION 8 • APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
EXPLANATION OF TERMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
OVERVIEW OF PREPROGRAMMED LOGIC SCHEMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

BASIC-OC Logic Scheme (Basic Overcurrent Protection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
OC-W-79 Logic Scheme (Overcurrent Protection with Reclosing) . . . . . . . . . . . . . . . . . . . . . . 8-2
OC-W-CTL Logic Scheme (Overcurrent Protection with Control) . . . . . . . . . . . . . . . . . . . . . . 8-2
FDR-W-IL Logic Scheme (Feeder Protection with Interlock) . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
BUS Logic Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
BACKUP Logic Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

DETAILS OF PREPROGRAMMED LOGIC SCHEMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
BASIC-OC LOGIC SCHEME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Operation - Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
Operation - Setting Group Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
Operation - Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7
BASIC-OC Logic Settings and Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

OC-W-79 LOGIC SCHEME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

Operation - Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8
Operation - Reclosing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Operation - Setting Group Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Operation - Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14
OC-W-79 Logic Settings and Equations (Overcurrent with Reclosing) . . . . . . . . . . . . . . . . . 8-15

OC-W-CTL LOGIC SCHEME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

Operation - Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16
Operation - Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16
Operation - Reclosing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16
Operation - Setting Group Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16
Operation - Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22
OC-W-CTL Logic Settings and Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-23

FDR-W-IL LOGIC SCHEME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-23

Normal Operation - Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24
Normal  Operation  -  Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24
Normal Operation - Reclosing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24
Normal  Operation  -  Setting  Group  Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24
Normal Operation - Bus Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25
Normal Operation - Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25
Contingency Operation - Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25
Contingency Operation - Backup Protection for Feeder Breaker Failure . . . . . . . . . . . . . . . . 8-25
Contingency Operation - Backup Protection for Feeder Relay Out-of-Service . . . . . . . . . . . 8-31
FDR-W-IL Logic Settings and Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-32

BUS AND BACKUP LOGIC SCHEMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-34

Normal Operation - Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-34
Normal Operation - Bus Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-34
Normal  Operation  -  Setting  Group  Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-34
Normal Operation - Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-34
Contingency Operation - Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-35
Contingency Operation - Backup Protection for Bus Breaker Failure . . . . . . . . . . . . . . . . . . 8-35
Contingency Operation - Backup Protection for BACKUP Relay Out of Service . . . . . . . . . . 8-35
Contingency Operation - Backup Protection for Feeder Relay Out of Service . . . . . . . . . . . . 8-41
BUS Logic Settings and Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-47
BACKUP Logic Settings and Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-48

Courtesy of NationalSwitchgear.com

Summary of Contents for BE1-951









































































































































































































































































































































































































































Reviews:

No comments

Related manuals for BE1-951

Samsung HCM4216W Owner'S Instructions Manual preview
HCM4216W
Brand: Samsung Pages: 67
Samsung HC-P4241W Owner'S Instructions Manual preview
HC-P4241W
Brand: Samsung Pages: 63
Encision AEM ENDSHIELD 2 EM200 Manual preview
AEM ENDSHIELD 2 EM200
Brand: Encision Pages: 44
UltraLux Qi-Shield User Manual preview
Qi-Shield
Brand: UltraLux Pages: 4
Quadbar Flexi 501 Handbook preview
Flexi 501
Brand: Quadbar Pages: 4
Mitsubishi VS-45609 Service Manual preview
VS-45609
Brand: Mitsubishi Pages: 71
HOZAN F-190-M Instruction Manual preview
F-190-M
Brand: HOZAN Pages: 3
Electrex Atto RCM D4 ECT Installation Manual preview
Atto RCM D4 ECT
Brand: Electrex Pages: 4
SPM ESCORT Installation Procedures Manual preview
ESCORT
Brand: SPM Pages: 30
GE Multilin MM200 Quick Start Manual preview
MM200
Brand: GE Multilin Pages: 34
Lazer Safe LS-CS-M-066 Operation Manual preview
LS-CS-M-066
Brand: Lazer Safe Pages: 58
Samsung SPT51A Service Manual preview
SPT51A
Brand: Samsung Pages: 99
Husqvarna Style 4982 Product User Manual preview
Style 4982
Brand: Husqvarna Pages: 36
Samsung PT5492 Owner'S Instructions Manual preview
PT5492
Brand: Samsung Pages: 55
Samsung SP-46L3HX Owner'S Instructions Manual preview
SP-46L3HX
Brand: Samsung Pages: 64
Samsung PTH5598 Owner'S Instructions Manual preview
PTH5598
Brand: Samsung Pages: 67
Samsung SP-43Q5HL Owner'S Instructions Manual preview
SP-43Q5HL
Brand: Samsung Pages: 84
Samsung PT5492X Service Manual preview
PT5492X
Brand: Samsung Pages: 64

Brands by name

Popular brands

Load more brands