2. Assembly Instructions
Unpack all items carefully and check parts
1.
Place frame structure (one piece) on soft and clean ground to protect frame from being scratched. Attach
wheels to axles by pushing wheel locking button on the outside of the wheel and inserting the axle
extension into the wheel.
Make sure to keep the locking button on the outside of the wheel pushed in
during this process, in order to enable the axle extensions, including the two pins, to be inserted all
the way into the wheel
. If not locked in, the wheel will not be connected to the axle and will not be
propelled!!! Test the lock by trying to pull the wheel out. To disassemble the wheels proceed in reverse
order.
2.
Erect Frame by unfolding and connecting the main frame tubes together at the two frame locks by
fastening the lower and upper frame locking knobs. Proceed in reverse for folding the caddy.
Page 4 of 16