5
ASSEMBLY INSTRUCTIONS
X8Pro & X8R
1.
Unpack all items carefully and check inventory. Place frame structure (one piece)
on soft clean ground to protect the frame from being scratched.
2.
Attach rear wheels to axles by pushing the wheel locking button (Pic-1)
on the outside of the wheel and inserting the axle extension in to the wheel.
Make sure to keep the locking button on the outside of the wheel
pushed in during this process, in order to enable the axle extensions,
including the four pins (Pic-2), to be inserted all the way into the
axle sprocket
. If not locked in, the wheel will not be connected to the
motor and will not be propelled! Test the lock by trying to pull the wheel out.
Note; the X8 caddy has a right (R) and a left (L) wheel, seen from behind in driving
direction. Please make sure that the wheels are assembled on the correct side,
so the wheel tread will match each other (Pic-3) as well as the front & anti-tip
wheels. To disassemble the wheels, proceed in reverse order.
Pic-3
Pic-6
Pic-2
Pic-5
Pic-1
Pic-4
3.
Erect the frame by first unfolding and connecting the main frame sections
together at the upper frame lock by fastening the upper frame locking knob
(Pic-5). The lower frame connection stays loose and will be in place once the golf
bag is attached (Pic-6). Proceed in reverse for folding the caddy.
