9
English
Cleaning
• Keep safety devices, ventilation openings
and the motor housing as free as possible
from dirt and dust. Rub the electric power
tool with a clean cloth or blow over it with
low pressure compressed air.
• We recommend that you clean your elec-
tric power tool immediately after each use.
• Clean the electric power tool regularly with
a damp cloth and somewhat soft soap. Do
not use any cleaning or solvent materials;
these can attack the device’s plastic com-
ponents. Make sure that no water can get
inside the electric power tool.
TECHNICAL DATA
Speed . . . . . . . . . . . . . . . 8500 min
-1
Grinding disc diameter . . . . . . . Ø 115 mm
Drive shaft thread. . . . . . . . . . . . . M14
Weight . . . . . . . . . . . . . . . . . 1.78 kg
Sound Pressure Level L
pA
. . . . 86.80 dB(A)
Uncertainty K
pA
. . . . . . . . . . . . . . 3 dB
Sound Power Level L
WA
. . . . . .97.80 dB(A)
Uncertainty K
WA
. . . . . . . . . . . . . . 3 dB
Hand Arm Vibration
Handle . . . . . . . . . . . . . . 3.827 m/s
2
Auxiliary Handle . . . . . . . . . 3.506 m/s
2
Uncertainty K . . . . . . . . . . . . . 1.5 m/s
2
DISPOSAL
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage. This
packaging is a raw material and as such can
either be reused or can be fed back into the
raw material cycle. The electric power tool and
its accessories are made from various materi-
als such as metals and plastics. Take defective
components to a special refuse collection
point. Ask about these at your specialist shop
or local council. The product and the user
manual may be subject to changes. Technical
data may be changed without prior notice.
Batteries
Think of the environment when disposing of
batteries. Contact your local authorities to find
out where your nearest disposal area is. Do
not dispose of batteries with domestic refuse.
Do not dispose of by burning, risk of explosion.
EC-DECLARATION OF CONFORMITY
We, the
Batavia GmbH, Weth. Wassebali-
estraat 6b, NL-7951 SN Staphorst,
declare
by our own responsibility that the product
Cordless Angle Grinder, Model
BT-CBAG001, Item-No 7062810
is according
to the basic requirements, which are defined in
the European Directives Electromagnetic Com-
patibility
2014/30/EU
(EMC),
2006/42/EC
(Machinery),
2011/65/EU
(RoHS)
and their
amendments. For the evaluation of conformity,
the following harmonized standards were
consulted:
EN60745-1:2009+A11
EN60745-2-3:2011+A2+A11+A12+A13
EN55014-1:2017
EN55014-2:2015
AfPS GS 2014:01
Staphorst, 04 September 2018
Meino Seinen, QA Representative
Batavia GmbH, Weth. Wassebaliestraat 6b,
7951 SN Staphorst, Netherlands
