5
English
Dear customer
Please familiarize yourself with the proper
usage of the device by reading and follow-
ing each chapter of this manual, in the order
presented. Keep these operating instruc-
tions for further reference.
Please read all safety instructions!
This manual contains important informa-
tion on operating and handling the device.
Keep these operating instructions for fur-
ther reference. Please pass it on along with
the unit if it is handed over to a third party.
Battery and charger not included!
The battery is available separately under
art. No: 7064221 (2Ah). The charger is avail-
able separately under art. No: 7064222
(2.4A) or 7064223 (0.4A).
These items are available online and in
participating stores.
1. Explanation of the symbols
The following symbols are used in the user
manual or on the product:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non-observance of the
instructions in this manual.
Always wear hearing protection.
The effects of noise can cause
hearing loss.
Wear safety glasses. When working
with electric power tools, sparks,
splinters, chips and dust particles
may be generated and these can
cause loss of sight.
Wear safety gloves!
Variable speed control.
CE stands for “Conformité
Européenne”, which means “In
accordance with EU Regulations”.
With the CE marking, the
manufacturer confirms that this
Electric tool complies with the
applicable European directives.
Do not dispose of electric power
tools with domestic refuse.
2. Machine specific safety warn-
ings for combitool
General safety instructions for grinding,
sandpaper sanding, working with wire
brushes, polishing, milling and abrasive
cutting:
• This power tool is intended for use as a
grinder, sandpaper sander, wire brush,
polisher, milling machine and abrasive
cutting machine.
• Please follow all safety instructions,
instructions, diagrams and data that
you receive with the appliance. If you do
not observe the following instructions,
this can lead to electrical shock, fire
and/ or serious injuries.
• Do not use any accessories that have
not been provided or recommended by
the manufacturer for this power tool.
Just because you can attach the acces-
sories to your power tool, does not
ensure they are safe to use.
• The permissible speed of the accessory
tool used must be at least as high as
the maximum speed specified for the
power tool. Accessories that rotate
faster than the permissible rate can
break and throw pieces into the air.
• The external diameter and thickness of
the accessory tool used must comply
with the dimensions of your power tool.
Incorrectly dimensioned accessory
tools cannot be sufficiently shielded or
controlled.
• Grinding discs, sanding drums or other
accessories must match the grinding
spindle or collet chuck of your power
tool exactly. Accessory tools which do
not fit precisely into the take-up of the
power tool will rotate unevenly, vibrate
severely and can lead to a loss of
control.
• Hold the power tool only by the insu-
lated gripping surfaces when perform-
ing an operation where the accessory
tool may contact hidden wiring or its
own cord. Contact with a live cable can
