FRONT HANDLE
The front handle is used to activate the electric
chainsaw jaws. The handle assembly can also
be adjusted for ease of operation and to help
prevent loss of control.
LOCK-OUT BUTTON
To help prevent accidental starting, the lock-
out button must be depressed along with the
switch trigger to activate the tool.
LOWER JAW LOCK BUTTON
The lower jaw lock button allows the lower jaw
to be locked open to perform maintenance on
the bar and chain. This button is exposed
when the front handle is pulled all the way
back. The motor for the electric chainsaw will
be disabled when this button is engaged.
QUICK-VIEW OIL INDICATOR
Semi-transparent bar lube reservoir that allows
user to see when to add lubricant.
ASSEMBLY
Unpacking:
This product requires assembly.
• Carefully remove the product and any
accessories from the box. Make sure that
all items listed in the packing list are
included.
WARNING
Do not use this product if any parts in the
packing list are already assembled to your
product when you unpack it. Parts on this list
are not assembled to the product by the
manufacturer and require customer
installation. Use of a product that may have
improperly assembled could result in serious
personal injury.
• Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
• Do not discard the packing material until
24
TM
the tool in wet or hazardous locations, use
of the product by young children or infirm
persons, failure to wear suitable personal
protection or suitable clothing, breathing
dust generated from cutting wood.
The above risks have been addressed by
including warnings in the safety instructions
and/or markings applied to the tool. The
vibration value stated in this manual is in
accordance with the standardized test of
EN60745. The operator should not be
exposed to high levels of vibration for
extended periods of time. The vibration
emissions of this tool are below 5m/s and
are within the limits set by 2002/44/EC for
continuous operation in an 8 hour day. The
actual operating conditions may vary or
possibly increase the vibration level from
those recorded in the standardized test.
Fig. 2
LOCK-OUT
BUTTON
SWITCH
TRIGGER
OIL CAP
UPPER JAW
LOWER JAW
SAW
BLADE
FRONT
HANDLE
QUICK VIEW
OIL INDICATOR
CORD
RETAINER
REAR
HANDLE
COMBINATION
WRENCH
LOWER JAW
LOCK BUTTON
KNOW YOUR ELECTRIC CHAINSAW:
See Figure 2.
The safe use of this product requires an
understanding of the information on the
product and in this operator’s manual as well
as a knowledge of the project you are
attempting. Before use of this product,
familiarize yourself with all operating features
and safety rules.
CORD RETAINER
A convenient cord retainer helps keep the
extension cord connection secure during tool
operation.
Croc Saw Manual.indb 24
24-04-14 11:18
