DEAR CUSTOMERS
Please familiarize yourself with the proper
usage of the unit by reading and following
each chapter of this manual, in the order
presented. Keep these operating instructions
for further reference.
This operating instruction contains important
details for handling the unit. Please pass it on
along with the unit if it is handed over to a
third party!
Please read all safety instructions!
These
instructions will make it easier for you to
handle the unit and help prevent
misunderstandings and possible damage or
injury.
GENERAL SAFETY INSTRUCTIONS
FOR POWER TOOLS
WARNING! Read all instructions
Failure to follow all instructions listed below
may result in electric shock, fire and/or
serious injury.
The term “power tool” in all of the warnings
listed below refers to your mains operated
(corded) power tool or battery operated
(cordless) power tool.
Save these instructions for future
reference!
1. Work area
a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gasses
or dust.
Power tools create sparks which may
ignite the dust of fumes.
c) Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
which earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions.
Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) Always use tool in conjunction with a
residual circuit breaker device.
The
use of a residual circuit breaker device
reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when
operating a power tool. Do not use a
power tool while you are tired or under
the influence of drugs, alcohol or
medication.
A moment of inattention while operating
power tools may result in serious
personal injury.
22
TM
7061274 Ma # 1406-17.indd 22
17-06-14 13:28
