-
4-
●
Absorption:
This stage charges the battery using a constant voltage providing that the Battery
Voltage is over 85%. The Charging Voltage for this stage is determined by the
Battery type selection: GEL-14.1V; AGM/WET-14.4V; Calcium-14.7V.
(Indicated by the Absorption Green LED ON)
●
Equalising:
This stage begins automatically if the Calcium Battery type has been selected.
This cycle pushes the charge voltage up to an equalising level of 16.2V.
(Indicated by the Absorption Green LED Flashing)
●
Analysis:
Diagnoses the battery condition for ten minutes. If the Full LED is flashing, this
indicates that the battery is still less than 12.5V after the absorption mode and that
there is a fault with the battery
(Indicated by the Green FULL LED Flashing)
●
Full / Float:
Battery is fully charged and is ready for use. It will be maintained at a safe
constant voltage.
Battery type selection: GEL-13.4V; AGM/WET-13.5V; Calcium-13.6V.
(Indicated by the Green Full LED ON)
Refresh Process (EXTEND YOUR BATTERY LIFE)
This Battery Charger provides a battery refresh function.
What does this feature do?? -
Refresh feature has been proven to break down the crystalline form of lead
sulphate within the battery cells which helps extend your battery life.
We recommend that you periodically use this refresh feature to ensure you get the maximum life out of your
battery.
