BPS Freedom 50
W
S
olar
P
anel
- 3 -
Only fold on the established fabric breaks between the solar panels.
Always keep the solar panels folded to protect them when not in use.
DO NOT machine wash, machine dry or dry clean.
DO NOT use soap or solvents to clean the solar panels as they can create
a
fi
lm on the panels which can a
ff
ect performance.
If dirt or debris collect on the solar panels use a clean, damp cloth to
wipe the panels.
DO NOT expose the solar panels to extreme heat or direct sunlight for
excessive periods of me as this may cause warping of the panels.
Make sure the solar panels are clean and dry before storage.
- 4 -
CARE INSTRUCTIONS
VOLTAGE CONTROLLER
BOX DC OUT PORT
OUTPUT CABLE
“C” CONNECTOR TIP
DO NOT a empt to charge non-rechargeable external ba eries or
electronic devices with non-rechargeable ba eries.
DO NOT use the external ba ery or other electronic device while it is
charging via the Freedom 50W Solar Panel.
DO NOT keep the external ba ery or electronic device in direct sunlight
while charging as exposure to extreme heat could result in a hazardous
reac on.
Cover the external ba ery or electronic device with a cloth or other
object, store it within the inside
fl
ap pocket of the Freedom 50W Solar
Panel or place it in the shade of the angled solar panels to shield it from
the direct sunlight.
When charging is complete disconnect the external ba ery or electronic
device from the Freedom 50W Solar Panel and move all items out of the
direct
sunlight.
CAUTION! IMPORTANT CHARGING & SAFETY NOTES
Unfold the Freedom 50W Solar Panel and angle it toward direct sunlight.
Open the inside
fl
ap pocket of the solar panel and remove the output
cable and set of ten (10) universal connector ps.
Plug either end of the output cable into the DC OUT port of the voltage
controller box that is built into the inside
fl
ap pocket of the solar panel.
Plug the other end of output cable into the connector p labeled “C”.
The le er “C” is embossed on the plas c por on of the p and there is a white ring
around the top metal por on of the p.
Plug the output cable with the “C” connector p a ached into the DC IN
port of the Freedom CPAP Ba ery to begin the charging process.
FREEDOM CPAP BATTERY CHARGING: SINGLE BATTERY
INSIDE FLAP
DC IN PORT
