Gea V.06
11
2018
The sanitizing cabinet is able to indicate to the centralized coin mechanism that a
program is in progress (machine busy), by sending a 24 Vac voltage signal.
When the machine is free, the signal is 0 Vac.
17.
ELECTRICAL RISKS
The operator must pay attention to the following situations defined as hazardous from
the electrical point of view:
1.
when the differential switch (circuit breaker) intervenes;
2.
when using the machine during a thunderstorm;
3.
when using the machine without proper feet protection (without shoes...) or with
wet hands or feet;
4.
when electric cables are damaged;
5.
when the machine is not connected to proper grounding according to the
regulations in force;
6.
when replacing lamps and/or ballasts or any material with non-genuine parts.
18.
MECHANICAL RISKS
The operator must pay attention to the following situations defined as hazardous from
the mechanical point of view:
1.
when using the machine for a purpose different than the intended one.
19.
INTERVENTIONS AND SMALL REPAIRS
1.
Remove, when necessary, the dust from the lamps and the grille using a vacuum
cleaner (fig. 2). Do not disconnect or reverse the electrical connection of the
lamps in any way.
2.
If the power cord is damaged, replace it immediately. The cable is available at the
manufacturer or the technical assistance service. Do not use the appliance with
damaged cable.
20.
SOLUTIONS TO POSSIBLE PROBLEMS
The most common problems that can occur and their possible solutions are shown in
the table below. Before intervening on the live parts, it is recommended to disconnect
the machine from the power supply.
Summary of Contents for GEA
Page 17: ...Gea V 06 16 2018 26 ELECTRICAL DIAGRAM...
Page 18: ...Gea V 06 17 2018...
