background image

Gea V.06 

2018 

6.

 

PRODUCT DESCRIPTION

 

 

The machine allows the sanitizing and cleaning of garments such as jackets, trousers, 

sweaters,  bathrobes,  towels,  work  clothes,  motorcycle  suits,  sports  helmets,  shoes, 

boots but also textiles such as blankets, cushions , curtains, sofa covers ... etc. 
The ozone produced by the internal generator, allows cleaning and sanitizing thanks 

to its strongly oxidizing natural gas structure. The ozone is able to eliminate bacteria, 
molds,  fungus,  and  insects,  inactivate  viruses  and  oxidize  the  chemical  molecules 

responsible for the most annoying odors that can be eliminated. 

 
The machine is available in three versions: 

 

STANDARD:

  suitable  to  be  installed  in  all  environments  where  it  is  necessary  to 

perform a sanitizing action on shoes, clothes, etc ...; 

SELF  WITH  CENTRALIZED  COIN  MECHANISM  (CC):

  suitable  for  installation  in 

self-service laundries as it can be connected to a centralized coin mechanism. 

The sanitizing program is enabled to reach the established credit; 

SELF  WITH  BUILT-IN  COIN  MECHANISM  (G):

  suitable  for  installation  in  self-

service laundries, where an external centralized coin mechanism is not available. The 
machine has a built-in coin mechanism. 

The sanitizing program is enabled to reach the established credit. 

 
N.B:

 both in the 

self with centralized coin mechanism

 operation and in the 

built-in 

coin mechanism

 mode, at the end of the cycle all additional residual credits are reset. 

It  is  therefore  recommended  to  insert  only  the  credit  needed  to  start  the  chosen 

program. 

 
 

7.

 

PROGRAM PHASES

 

 

The 

program

 or 

sanitizing and cleaning cycle

 consists of three phases: 

 

-

 

Phase 1^:

 ozone is produced to saturate the air inside the cabinet; 

-

 

Phase 2^:

 the ozone-saturated air is circulated by a fan to allow a correct 

distribution and sanitizing action on the items to be sanitized, previously inserted; 

-

 

Phase 3^:

 the air, rich in ozone, is circulated through the blaster. Thanks to this 

system, the ozone decreases and ensures that the indoor air is not harmful to the 

person who opens the door and removes the clothes at the end of the cycle. 
At the same time the germicidal lamp inside, keeps the air 

clean

When  the  machine  door  is  opened,  at  the  end  of  the  sanitizing  and  cleaning 

program, the detection of a slight typical odor of ozone is to be considered normal. 

 

Opening  the  door  when  the  program  has  started  is  forbidden.  During  the 
sanitizing phase, inside the machine there is an ozone level higher than the 

safety  level.  Wait  until  the  program  has  finished  and  the  message 

PROGRAM  COMPLETED  -  OPEN  THE  DOOR

  appears  on  the  display  or  the 

green light is on. 

THE  MACHINE  HAS  A  SAFETY  DEVICE  THAT  PREVENTS  OPENING  THE  DOOR  WHEN 
THE PROGRAM IS RUNNING. 

 

 
 

 

Summary of Contents for GEA



















Reviews: