background image

Gea V.06 

14 

2018 

 

22.

 

TRANSPORT 

 

Transport  the  packed  machine  close  to  the  installation  point  and  proceed  with 

unpacking. The appliance must not be transported manually by people, but by means 
of forklift trucks. 

It  is  recommended  not  to  place  the  machine  too  close  to  the  walls  and  other 
machines; position it far from electric and electronic parts and cable tray in order to 

guarantee the operator an easy use and perfect maintenance. 

 
 

23.

 

STORAGE

 

 

If  necessary,  store  the  machine  still  packed  in  a  suitable  place,  protected  and  not 
subject to bad weather. 

 

 
24.

 

WARRANTY TERMS

 

 

The manufacturer's warranty becomes void: 

 

 

in the event of repairs carried out by unauthorized personnel or service centers; 

 

total or partial failure to follow the instructions contained in this manual;  

 

for poor storage, lack of maintenance/cleaning or incorrect assembly; 

 

when there are damages caused by the customer; 

 

when  there  are  failures  or  damages  that  do  not  derive  from  a  manufacturing 

defect; 

 

when  there  are  damages  deriving  from  a  fortuitous  event  (fire,  short  circuit)  or 
due to third parties (tampering); 

 

when  using  the  machine  for  a  purpose  different  than  the  one  specified  in  this 
manual; 

 

when  using  non-genuine  spare  parts  or  accessories,  modified  or  not  suitable  for 

the appliance. 

 

 

25.

 

DISPOSAL

 

 

According  to  the  directive  2012/19/UE  on  waste  of  electrical  and 

electronic equipment, do not treat this product as urban waste. 
This appliance is marked according to the directive 2011/65/UE regarding 

restriction  of  use  of  specific  dangerous  substances  in  electrical  and 

electronic equipment.  
This symbol on the product or on its packaging indicates that this product 

must not be treated as urban waste. Instead it shall be handed over to a 
recycling center for the recycling of electrical and electronic equipment. 

Ensuring  this  product  is  disposed  of  correctly  will  help  prevent  potential  negative 

consequences for the environment and human health which could otherwise be caused 
by  inappropriate  waste  handling  of  this  product.  The  recycling  of  materials  will  help 

preserve natural resources. 
The abusive disposal of the product by the user may lead to administrative sanctions. 

 
 

 

 

Summary of Contents for GEA



















Reviews: