Giove
4
2020
4.
WATER TO BE USED
It is recommended to use only drinking water. Do not use distilled water or water with
hardness less than 12 °
(French). This type of water causes malfunctions to the
machine (i.e. corrosion, black water leaking from the iron, etc.).
The appliance has been designed to work with tap water with an average hardness
between 8 ° and 20 °
(French). If the tap water contains a lot of limestone do not use
only pure demineralized water but a mixture of 50% tap water and 50%
demineralized water.
Do not use distilled water, undiluted demineralized water, rain water or water
containing additives (for instance starch, perfume) or water produced by other
household appliances, softeners and filter jugs.
Do not introduce chemical or natural substances, detergents, scale removers, etc.
5.
ELECTRICAL CONNECTION
Connect the machine to a power socket protected by a differential magneto-thermic
switch, in compliance with current regulations and with a capacity corresponding to
the characteristics of the machine.
In the event of incompatibility between the socket and the plug of the appliance, have
the socket replaced with another of a suitable type by authorized and qualified
personnel.
Make sure that the line voltage and frequency correspond to what is indicated on the
label placed on the machine.
It is mandatory to connect the appliance to a good ground. The manufacturer cannot
be held responsible for any damage caused by the lack of grounding of the system.
6.
STARTING
Fig. 3
Fig. 2
