Vaporsprint
16
2016
15.
THERMIC RISKS
The machine can become extremely hot: use it very carefully and disconnect the plug
when not in use.
The following situations are considered dangerous for the operator:
1.
touching the iron base when it is hot;
2.
touching the solenoid valve when VAPORSPRINT is under pressure;
3.
emptying the boiler or touching the water discharge tap while there is pressure
inside the boiler;
4.
touching the valve plug when boiler is under pressure;
5.
directing the steam jet towards people or animals.
Do not iron garments directly on
persons.
Do not leave hot iron on garments
when it is on.
After use, always put iron on its
rubber rest.
16.
PACKING, STORAGE AND TRANSPORT
The ironing board mod. VAPORSPRINT can be packed with cellophane or in a
cardboard box which cannot be turned upside down.
It is not a stiff package, therefore it is not shock-resistant. We advise you to handle
the box with maximum care. Do not use it as stool or support.
For authorized distributors and resellers: Do not store the boxes one on top of another
and keep them dry, paying attention to store them with
upwards.
17.
WARRANTY
The manufacturer's warranty becomes void:
•
in the event of repairs carried out by unauthorized personnel or service centers;
•
total or partial failure to follow the instructions contained in this manual;
•
for poor storage, lack of maintenance/cleaning or incorrect assembly;
•
when there are damages caused by the customer;
•
when there are failures or damages that do not derive from a manufacturing
defect;
•
when there are damages deriving from a fortuitous event (fire, short circuit) or
due to third parties (tampering);
•
when there are damages caused by limescale;
•
when the damage has been caused by the use of water different from that
indicated in the instructions (see "WATER CONNECTION" chapter);
•
when using the machine for a purpose different than the one specified in this
manual;
ATTENTION:
THERMIC DANGER
INCANDESCENT
IRON BASE
