Tips:under the 1+1 protection mode,master port should be
connected to the other device’s master port.
3.3.4 NTP Configuration
Network Time Protocol (NTP) to enable and disable, when NTP
almighty you need to set the server IP and port number.
3.3.5 SNMP Configuration
Configure SNMP protocol parameters:
When the trap mode select V1 or V2 Mode, you need to set Set_key
and Get_key;
When the trap mode selection V3 Mode, you need to set Auto_proto
and Poli_proto;
When the trap mode select All Mode, you need to set all parameters.
