32PCM voice multiplexer user manual
20
1.
current Ethernet information
，
Please input '1'
[PDH /]:1
Local/Remote Ethernet Interface Link Status
L1:Down ---- --- L2:Down ---- --- L3:Down ---- --- L4:Down ---- ---
R1:Down ---- --- R2:Down ---- --- R3:Down ---- --- R4:Down ---- ---
==========Local VLAN========
separate mode is:special channel separate
Information of separate set:Havn't Set Separated!
==========Remote VLAN========
Remote is invlid!
==========Local BandWidth========
1:100M+00*32K---2:100M+00*32K---3:100M+00*32K---4:100M+00*32K
==========Remote BandWidth========
Invlid---Invlid---Invlid---Invlid---
The device support packet sizes up to 1916!
==========Local PHY Mode========
PORT1:Auto PORT2:Auto PORT3:Auto PORT4:Auto
==========Remote PHY Mode========
PORT1:Invlid PORT2:Invlid PORT3:Invlid PORT4:Invlid
==========Local Flow Control========
PORT1:OFF PORT2:OFF PORT3:OFF PORT4:OFF
==========Remote Flow Control========
PORT1:Invlid PORT2:Invlid PORT3:Invlid PORT4:Invlid
==========Local Priority========
802.1P Configration:Disable 802.1P!
Pri-value: PORT1:0 PORT2:0 PORT3:0 PORT4:0
==========Remote Priority========
802.1P Configration:Invlid
Pri-value: PORT1:Invlid PORT2:Invlid PORT3:Invlid PORT4:Invlid
2.
current PDH & E1 information
，
Please input '2'
[PDH /]:2
Main and reserve fiber signal lost.
LOCAL/REMOTE Fiber alarm Status:
OLOS OLOF E3 E6
Alar OK OK OK
---- ---- ---- ----
LOCAL/REMOTE E1 LOS alarm Status(L:LOS,-:Insert):
1 2 3 4
L L L L
- - - -
LOCAL/REMOTE E1 AIS alarm Status(L:LOS,-:No AIS):
1 2 3 4
- - - -
- - - -
Not Command the remote E1 Loop-Back.
Not Mask E1 Alarm.
LED indication romote device status.
Sound Alarm OFF.
Local fiber loop off.
Hot line telephone on-hook.
Press Any Key to Continue.........
3.
current Phone & AUX Port information
，
Please input '3'
