32PCM voice multiplexer user manual
24
priority grade.
Attention: when ethernet packet is with tag, the device will dedicate priority grade
automaticly by tag; otherwise, use setting x y to set priority grade by real situation.
4.5 802.1Q switch setting, input "5"
[PDH /Config]:5
====================== 802.1Q Config =================================
== Note:You can choice one of 3,4,5,and 3,4 used for back-to-back ===
== ===
== 1.Enable or disable 802.1Q,Please input '1' ===
== Explanation: p:ports number(0<p<=5,5:optic port) ===
== xxxx:VID(0=<x<4096); yy:VLAN number(0=<yy<16) ===
== 2.PVID config: pvid xxxx p p p p p ===
== Disable tag insertion when xxxx = 0000 ===
== 3.802.1Q membership config command: set/clr yy xxxx p p p p p ===
== e.g:vlan1:port1-3,vid=2; vlan2:port4-5,vid=3; ===
== vlan 00 1 2 3; vlan 01 4 5 ===
== 4.VLAN Tag set: tag z p p p p ===
== Explanation: z: 1:Egress Tagged; 0:Egress Untagged ===
== Note : port5 can't set ===
== 5.Clear vid and memberships,Please input '5' ===
== 9.Loop up current switcher information,Please input '9' ===
== ===
== Exit,Please input '0' ===
======================================================================
[PDH /802.1Q Config]:
4.6 channel separating setting, input"6"
[PDH /Config]:6
==================== Channel Separate Config ==================
