background image

Page 7

For technical questions, please call 1-888-866-5797.

Item 63634 
        

S

AFET

y

Op

ERA

TION

M

AINTENAN

c

E

S

ETU

p

Vibration Safety

This tool vibrates during use.  
Repeated or long-term exposure to vibration may 
cause temporary or permanent physical injury, 
particularly to the hands, arms and shoulders.  
To reduce the risk of vibration-related injury:

1.  Anyone using vibrating tools regularly or for 

an extended period should first be examined 
by a doctor and then have regular medical 
check-ups to ensure medical problems are not 
being caused or worsened from use.  Pregnant 
women or people who have impaired blood 
circulation to the hand, past hand injuries, 
nervous system disorders, diabetes, or 
Raynaud’s Disease should not use this tool.  
If you feel any symptoms related to vibration (such 
as tingling, numbness, and white or blue fingers), 
seek medical advice as soon as possible.

2.  Do not smoke during use.  Nicotine reduces 

the blood supply to the hands and fingers, 
increasing the risk of vibration-related injury.

3.  Wear suitable gloves to reduce the 

vibration effects on the user.

4.  Use tools with the lowest vibration 

when there is a choice.

5.  Include vibration-free periods each day of work.

6.  Grip tool as lightly as possible (while still keeping 

safe control of it).  Let the tool do the work.

7.  To reduce vibration, maintain the tool as 

explained in this manual.  If any abnormal 
vibration occurs, stop use immediately.

 SAVE THESE INSTRUcTIONS.

Grounding

TO pREVENT ELEcTRIc SHOcK AND DEATH FROM INcORREcT GROUNDING: 
check with a qualified electrician if you are in doubt as to whether the outlet is properly 
grounded.  Do not modify the power cord plug provided with the charger.  Do not use the 
charger if the power cord or plug is damaged.  If damaged, have it repaired by a service facility 

before use.  If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

Extension cords

Note:

  Extension cords must not be used with this item’s Charger.

Symbology

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

V

Volts

~

Alternating Current

A

Amperes

n0 xxxx/min.

No Load Revolutions 
per Minute (RPM)

WARNING marking concerning Risk 
of Eye Injury.  Wear ANSI-approved 
safety goggles with side shields.

Read the manual before 
set-up and/or use.

WARNING marking 
concerning Risk of Fire.  
Do not cover Charger 
ventilation ducts.
Charge on fireproof surface only.
WARNING marking concerning 
Risk of Electric Shock.
Properly connect Charger’s power 
cord to appropriate outlet.
WARNING marking concerning 
Risk of Explosion.  
Do not puncture, short, or open 
battery packs and do not charge 
damaged battery packs.

Summary of Contents for 1772C-B

















Reviews: