Bauer Hypermax Lithium 19115C-B Owner'S Manual & Safety Instructions Download

Page: 9 / 16

Page 9

For technical questions, please call 1-888-866-5797.

Item 64995

Maint

nanc

tup

Forward and reverse trimming Wheel Setup

1. Turn the Trimmer upside down. Slide the

Wheel Assembly horizontally with wheels
facing forward onto the Metal Plate
located on the underside of the Guard.
Make sure the Wheel Assembly locks

onto the Plate – it will click into place

when properly installed.

2. Remove the Wheel Assembly by

pushing in on the Tab and pulling
Wheels away from the Metal Plate.

Side to Side trimming Wheel Setup

1. Turn the Trimmer upside down.

Slide the Wheel Assembly vertically
with wheels facing sideways onto
the Metal Plate located on the
underside of the Guard. Make sure
the Wheel Assembly locks onto the

Plate – it will click into place when

properly installed.

2. Remove the Wheel Assembly by

pushing in on the Tab and pulling
Wheels away from the Metal Plate.

Wheel

assembly

Metal

plate

tab

Figure c

Guard

Wheel assembly

Metal

plate

tab

Guard

Figure D

Summary of Contents for Hypermax Lithium 19115C-B

















Search results

Summary of Contents for Hypermax Lithium 19115C-B

Reviews:

Related manuals for Hypermax Lithium 19115C-B

Brands by name

Popular brands

Bauer Hypermax Lithium 19115C-B, Owner'S Manual & Safety Instructions

Search results

Summary of Contents for Hypermax Lithium 19115C-B

Reviews:

Related manuals for Hypermax Lithium 19115C-B

Brands by name

Popular brands