To move door up or down:
Loosen
screws shown and move door up or
down to suit. Re-tighten.
To move door in or out:
Loosen screw
shown and move door in or out to suit.
Re-tighten.
To move door left or right:
Loosen
screw shown and move door left or right
to suit. Re-tighten.
If the alignment of the door needs adjusting, follow the instructions below.
Step 5
Step 4
Re-fit door:
a:
Reposition both hinges onto the hinge plates.
b:
Push the front until the hinge ‘clicks’ into position.
b
a
Hinge adjustment
Once levelled, apply a bead
of
silicone
to the join between
the unit and wall, on
all four sides.
Leave silicone, 24 hours to dry.
LABELS
COLUMNA ELITE
8.04.2016
For any further information please contact
Bauhaus on:
0345 873 8840
Or visit our web-site at:
www.crosswater.co.uk
The manufacturer reserves the right to make technical
Important information
All ceramic sanitary ware is subject to the limitations of the
natural clay/china based products shrink and move during high
process absolutely, minor variations in the dimensional tolerance
Before installing a wooden bathroom product into a new property,
extension or recently plastered room we strongly advise the
building/room is completely dry, well ventilated and adequately
heated prior to installation.
