For any further information please contact
Bauhaus on:
0845 873 8840
Or visit our web-site at:
www.bauhaus-bathrooms.co.uk
The manufacturer reserves the right to make technical
modifications without prior notice.
a:
Attach the tap to basin and
carefully bed in the waste
using silicone
only
.
b:
Carefully apply silicone to
the top edges of the unit.
c:
Carefully position the basin
down onto the unit, ensure it is
centrally positioned and flush
at the back.
Connect the tap and waste.
Leave the silicone to dry for
24 hours.
a: Attach handle:
Attach the handle to the
drawer front.
b: Re-fit drawer:
Pull out both runners.
1:
Place the drawer onto the runners.
2:
Push in until the drawer ‘clicks’ into
position.
Important information
All ceramic sanitary ware is subject to the limitations of the
manufacturing process. Unlike machine finished products, natural
clay based products shrink and move during high temperature
firing and, because it is not possible to control this process
absolutely, minor variations in the dimensional tolerance, form
and surface of the finished products will occur.
Before installing a wooden bathroom into a new property,
extension or recently plastered room we strongly advise the
building/room is completely dry, well ventilated and adequately
heated.
Step 6
Step 7
1
2
‘click’
a
c
b
Note: Basin waste and tap fittings when over tightened can
create stress within the ceramic material which may in time
cause the failure of the product. Waste fittings should be
carefully bedded in silicone and the back nut hand tightened an
additional quarter turn using a suitable spanner is sufficient to
create the required watertight seal. Care should also be taken
when fitting brassware to tap platforms in order to prevent
similar stress related failures.
a
b
